Minwax gel stain vs general finishes water-based stain

Minwax gel stain vs general finishes water based stain

Minwax gel stain vs general finishes water-based stain : The Minwax gel is a more affordable option that gives you the same beautiful color as the General Finishes Water-Based Stain. You can use it on any wood, which is great for homeowners looking to save money on wood preparation and varnishing by doing it themselves. The gel stain can also be applied easier than traditional stains, making it the perfect way to save time and energy!

Minwax gel stain vs general finishes water based stain

Both of these stains work great, but there are a few key differences. The Minwax gel stain can be applied to any wood and is an excellent choice for those that don’t want to do a lot of sanding before staining their wood. At the same time, the General Finishes water-based stain can be applied to any wood, including softwoods like pine and birch. However, the General Finish Water Based Stain is not recommended for areas with a lot of direct sunlight because it will fade over time.

Both stains are great options depending on personal preference of application – we love that with both, you don’t have to sand the wood first, and they both are easy to clean up! Watch this video from Minwax for more information about their product line.

The Minwax Gel Stain is a fast-drying synthetic resin-based stain that will give you a uniform color with little to no grain showing through after one coat. Use the Minwax Gel Stain to add color to bare wood or on top of pre-stained surfaces. The gel formula makes it easy to add more coats if necessary without leaving ridges, and the gel consistency allows you to wipe off any excess between coats for a smooth finish.

Minwax Gel Stain for wood

The Minwax Gel Stain is perfect for wood because it dyes the wood instead of just covering up the color. This makes it darker than the General Finishes Water Based Stain. The dark pigment in this paint-type dye makes a huge difference on wood with a very light tone. You can also use this dye on other surfaces such as stone or concrete, but you will need to use a brush instead of the Minwax Gel Stain.

The Minwax product is much thicker and can be applied without coverage issues. You may have seen General Finishes recommended for floors before, but this is because it’s usually applied with a paint roller. The stain will stick much better to the wood with a brush, so you’ll want to use the Minwax Gel Stain for that application.

The Minwax Water-Based Wood Stain is an easy to apply an oil-based stain that creates beautiful color on bare or pre-stained wood. The water-based stain penetrates the wood grain to create a natural look that highlights the beauty of the wood with minimal color variation. This oil-based stain is designed for use on all exterior and interior types of bare wood but is not recommended for floors or furniture.

Minwax Water-Based Wood Stain vs. Polyurethane

Minwax Water-Based Wood Stain can be used on floors, decks, furniture, and other bare wood surfaces. Minwax Polyurethane must only be used on floors due to its more protective nature.

The Minwax Water Based Stain is an excellent option for living spaces that are highly trafficked and will get a lot of wear. It is excellent for protecting wood from scratches and scuffs that would otherwise bleach out the color of the stain. This product can also be left unfinished to naturally weather over time, which makes it a versatile option for any living space.

Water-Based Stain vs Gel Stain

MINWAX GEL STAIN VS general finishes

Both water-based stains and gel stains have their strengths. People looking for a more natural look will love the way water-based stains bring out the actual color of the wood. When applied to new wood, it allows you to show off the beauty of bare wood without any added dye or pigment.

On the other hand, those that want their stain to last longer should opt for a gel stain. This type of stain is excellent for protecting your wood against sun damage and water, making it more versatile than water-based stains.

Water-Based Stain vs Oil Based Stain

Oil based stains are much thicker than water-based stains but can still be applied with a brush. Oil-based stains will also last longer than their water-based counterparts and have less of a tendency to fade, in addition to being more viscous and filling in cracks better for a more solid color.

Oil Based Stain vs. Vinyl Sealer

Since oil-based stains penetrate deeper into the wood, they are often used as a sealer underneath other finishes like polyurethane or wax instead of on top. If you’re looking to use an oil-based product to add color, you’ll want to go with a stain instead of using it as a sealer.

Vinyl Sealer vs. Water Based Stain

Vinyl sealer is perfect for protecting surfaces from spills and scuffs. However, the vinyl spray does not provide the same level of protection or durability offered by Minwax Polyurethane.

Vinyl sealer is great for surfaces like countertops or furniture that will not be exposed to a lot of wear and tear. It’s also a good option if you’re looking to use your home as an Airbnb rental when you want the space to look nice but don’t need it to last forever. Vinyl sealer is also easier to apply than a polyurethane or wax finish.

Water-Based Stain vs Polyurethane

Both water-based stains and polyurethanes have their own benefits. Water-based stains, such as Minwax Wood Finish, are easy to apply while being more environmentally friendly. On the other hand, Polyurethanes are durable, offering protection against spills and sunlight.

Water-Based Stain vs Wax

Minwax Wood Finish is a water-based stain that can be applied with a brush. Minwax Paste Finishing Wax is an oil-based product that must be used by hand but offers more shine than the Water-Based wood finish, which has no added sheen.


Question: I have a cabinet that is in desperate need of some TLC. The finish on the wood has faded, and it’s just generally dingy looking. It looks like an old piece. Would you recommend using Minwax Gel Stain or General Finishes Water Based Stain?

Answer: You can use either, but the Minwax gel stain direction suggests a light sanding with 220 grit before staining. The water-based General Finishes product does not call for a pre-condition; however, if you wish to do so, you can sand with a light grit (220) and wipe it down with a tack cloth.

General Finishes has been making stains in the US for over 15 years and recently has released a new line of water-based stains that are incredible. They have also introduced their own excellent finishing products- they offer satin and semi-gloss topcoats as well as a protective wax finish(one coat). You can read more about the water-based stains here (there is a tab to click on for gel stains).

Water based finishes are great because they clean up with water and have virtually no fumes. You can read about more benefits here.

That’s all article about Minwax gel stain vs general finishes. I hope this helps, and I am sure I will get a lot of emails regarding which is better, so try to refrain from that as it comes down to preference and what looks best with your furniture.

Leave a Comment

Your email address will not be published. Required fields are marked *